PET Sheet Extrusion Resin 76 IV
PET Sheet Extrusion Resin 76 IV is polyethylene terephthalate pellets with an intrinsic viscosity of 76 ml/g, optimized for downstream extrusion into amorphous sheet for thermoforming trays and containers. The melt strength is tailored for flat die extrusion at temperatures of 260-280°C, producing sheet with excellent clarity and formability. It is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the viscosity is 78 ml/g or higher
PET with viscosity of 78 ml/g or more is classified under the specific subheading for high-viscosity PET.
If imported as finished PET sheet
Finished plates, sheets, film, foil and strip of PET are classified under heading 3920.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document the 76 ml/g viscosity to support classification under 3907.69.00, as this is below the 78 ml/g threshold for 3907.61.00
• Ensure the pellets are in primary form and not yet extruded into sheet
• If the resin contains slip agents or other additives above 1%, classification may need review
Related Products under Tariff item 3907.69.00
Alpek PET Resin ER271F
Alpek PET Resin ER271F is a standard polyethylene terephthalate pellet for general extrusion into profiles and tubes, offering consistent melt flow and mechanical properties. It is designed for applications beyond packaging, such as industrial profiles and tubing, where dimensional stability and chemical resistance are required. It is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Amorphous PET Pellets for Strapping
Amorphous PET pellets with medium intrinsic viscosity (75 ml/g), used for extrusion into polyester strapping. The pellets are in primary form and consist of poly(ethylene terephthalate), classified under the 'Other' tariff item.
Biaxially Oriented PET (BOPET) Base Resin
Biaxially Oriented PET (BOPET) base resin in primary pellet form, used to produce biaxially oriented films for packaging and labels. The resin is unmodified PET with terephthalate monomer units exceeding 95% by weight, falling under the 'Other' tariff item for poly(ethylene terephthalate) in primary forms.
Blow Molding Grade PET Chips
High-clarity PET chips with intrinsic viscosity 72-77 ml/g, designed for stretch blow molding of PET water and soda bottles. The chips are in primary form and consist of poly(ethylene terephthalate), falling under the 'Other' tariff item.
Carbonated Soft Drink PET IV 74
PET resin with intrinsic viscosity 74 ml/g, specifically formulated for 2L carbonated soft drink bottles with CO2 retention. The resin contains nucleating agents for consistent crystallinity, but the base polymer is PET in primary form, classified under the 'Other' tariff item.
Clear Bottle Grade PET Resin
High-clarity PET resin pellets with intrinsic viscosity 71-76 ml/g, optimized for sparkling clear single-serve beverage bottles. The resin is in primary form and consists of poly(ethylene terephthalate), falling under the 'Other' tariff item.