PET Resin Grade 7940B
PET Resin Grade 7940B is a high-viscosity polyethylene terephthalate polymer in primary pellet form, used primarily for manufacturing polyester fibers and yarns. The high viscosity provides excellent melt strength for spinning processes, producing fibers with consistent diameter and mechanical properties. It is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the viscosity is 78 ml/g or higher
High-viscosity PET is specifically classified under 3907.61.00.
If imported as finished polyester yarn
Finished synthetic filament yarn is classified in Chapter 54.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify the exact viscosity of the resin, as high-viscosity PET may fall under 3907.61.00 if it reaches 78 ml/g or higher
• Confirm the product is in primary form and not yet spun into fibers
• If the resin is intended for textile applications, note that the final fibers will be classified in Section XI
Related Products under Tariff item 3907.69.00
Alpek PET Resin ER271F
Alpek PET Resin ER271F is a standard polyethylene terephthalate pellet for general extrusion into profiles and tubes, offering consistent melt flow and mechanical properties. It is designed for applications beyond packaging, such as industrial profiles and tubing, where dimensional stability and chemical resistance are required. It is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Amorphous PET Pellets for Strapping
Amorphous PET pellets with medium intrinsic viscosity (75 ml/g), used for extrusion into polyester strapping. The pellets are in primary form and consist of poly(ethylene terephthalate), classified under the 'Other' tariff item.
Biaxially Oriented PET (BOPET) Base Resin
Biaxially Oriented PET (BOPET) base resin in primary pellet form, used to produce biaxially oriented films for packaging and labels. The resin is unmodified PET with terephthalate monomer units exceeding 95% by weight, falling under the 'Other' tariff item for poly(ethylene terephthalate) in primary forms.
Blow Molding Grade PET Chips
High-clarity PET chips with intrinsic viscosity 72-77 ml/g, designed for stretch blow molding of PET water and soda bottles. The chips are in primary form and consist of poly(ethylene terephthalate), falling under the 'Other' tariff item.
Carbonated Soft Drink PET IV 74
PET resin with intrinsic viscosity 74 ml/g, specifically formulated for 2L carbonated soft drink bottles with CO2 retention. The resin contains nucleating agents for consistent crystallinity, but the base polymer is PET in primary form, classified under the 'Other' tariff item.
Clear Bottle Grade PET Resin
High-clarity PET resin pellets with intrinsic viscosity 71-76 ml/g, optimized for sparkling clear single-serve beverage bottles. The resin is in primary form and consists of poly(ethylene terephthalate), falling under the 'Other' tariff item.