PET Preform Resin Pellets
PET Preform Resin Pellets are transparent polyethylene terephthalate pellets with an average intrinsic viscosity of 74 ml/g, specifically designed for manufacturing bottle preforms used in beverage packaging. This viscosity specification balances the injection molding of preforms with subsequent stretch blow molding performance, ensuring optimal material distribution and clarity. The product is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the viscosity is 78 ml/g or higher
Higher viscosity PET falls under the specific subheading for PET with viscosity of 78 ml/g or more.
If the pellets are already formed into preforms
Finished preforms are articles of plastics and would be classified under carboys, bottles, flasks and similar articles.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Maintain documentation showing the average viscosity of 74 ml/g to support classification under 3907.69.00
• Confirm the pellets are in primary form (granules or pellets) and not further worked
• Be aware that if the PET is imported with colorants or other additives above 1% by weight, classification may change
Related Products under Tariff item 3907.69.00
Alpek PET Resin ER271F
Alpek PET Resin ER271F is a standard polyethylene terephthalate pellet for general extrusion into profiles and tubes, offering consistent melt flow and mechanical properties. It is designed for applications beyond packaging, such as industrial profiles and tubing, where dimensional stability and chemical resistance are required. It is classified under tariff item 3907.69.00 as other poly(ethylene terephthalate) in primary forms.
Amorphous PET Pellets for Strapping
Amorphous PET pellets with medium intrinsic viscosity (75 ml/g), used for extrusion into polyester strapping. The pellets are in primary form and consist of poly(ethylene terephthalate), classified under the 'Other' tariff item.
Biaxially Oriented PET (BOPET) Base Resin
Biaxially Oriented PET (BOPET) base resin in primary pellet form, used to produce biaxially oriented films for packaging and labels. The resin is unmodified PET with terephthalate monomer units exceeding 95% by weight, falling under the 'Other' tariff item for poly(ethylene terephthalate) in primary forms.
Blow Molding Grade PET Chips
High-clarity PET chips with intrinsic viscosity 72-77 ml/g, designed for stretch blow molding of PET water and soda bottles. The chips are in primary form and consist of poly(ethylene terephthalate), falling under the 'Other' tariff item.
Carbonated Soft Drink PET IV 74
PET resin with intrinsic viscosity 74 ml/g, specifically formulated for 2L carbonated soft drink bottles with CO2 retention. The resin contains nucleating agents for consistent crystallinity, but the base polymer is PET in primary form, classified under the 'Other' tariff item.
Clear Bottle Grade PET Resin
High-clarity PET resin pellets with intrinsic viscosity 71-76 ml/g, optimized for sparkling clear single-serve beverage bottles. The resin is in primary form and consists of poly(ethylene terephthalate), falling under the 'Other' tariff item.