Synthomer Plextol VA Chloride-Ethylene Terpolymer Dispersion
Synthomer Plextol VA is a stable aqueous dispersion of a vinyl acetate-vinyl chloride-ethylene terpolymer, with vinyl acetate derivatives below 50% and no aromatic monomers. It is used as a binder in nonwoven fabrics and textiles. It is classified under tariff item 3904.30.00 as a vinyl chloride-vinyl acetate copolymer in primary form.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If vinyl acetate is the predominant monomer
Vinyl acetate copolymers in aqueous dispersion are classified under heading 39.05 when vinyl acetate predominates.
If ethylene is the predominant monomer
Ethylene-vinyl acetate copolymers are classified under heading 39.01 when ethylene predominates.
If the product is formulated as a finishing agent for textiles
Finishing agents for textiles are classified under heading 38.09 when they contain specific additives.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Classify the dispersion as a polymer in primary form and confirm the vinyl chloride content is predominant
• Provide the technical datasheet with the monomer ratio to support the classification
• Ensure the product is not used as a textile material, which would fall under Section XI
Related Products under Tariff item 3904.30.00
BASF Acronal V 215 Terpolymer Latex
BASF Acronal V 215 is an aqueous latex containing a vinyl acetate-vinyl chloride-ethylene terpolymer, with vinyl acetate contributing less than 50% by weight. It is supplied in primary form as a liquid dispersion and is used as a binder in paper coatings and textile applications. It is classified under tariff item 3904.30.00 as a vinyl chloride-vinyl acetate copolymer in primary forms.
Celanese Vamac G Terpolymer Resin Pellets
Celanese Vamac G consists of vinyl acetate-vinyl chloride-ethylene terpolymer pellets, with vinyl acetate derivatives below 50% by weight and no aromatic monomers. The pellets are in primary form and are used as a base resin in flexible flooring compounds. It is classified under tariff item 3904.30.00 as a vinyl chloride-vinyl acetate copolymer.
Dairen Vinnapas 402 Vinyl Chloride-Vinyl Acetate-Ethylene Emulsion
Dairen Vinnapas 402 is a water-based emulsion of a vinyl acetate-vinyl chloride-ethylene terpolymer, containing less than 50% vinyl acetate derivatives and no aromatic monomers. It is in primary form as a liquid dispersion and serves as a binder in paints and coatings. It is classified under tariff item 3904.30.00 as a vinyl chloride-vinyl acetate copolymer.
Dow VLPVC-65 Terpolymer Emulsion for Adhesives
Dow VLPVC-65 is a low-VOC emulsion of a vinyl acetate-vinyl chloride-ethylene terpolymer, with vinyl acetate derivatives below 50% and no aromatic monomers. It is in primary liquid form and is designed for pressure-sensitive adhesives. It is classified under tariff item 3904.30.00 as a vinyl chloride-vinyl acetate copolymer.
Laroflex MP 15 Vinyl Chloride Copolymer Flakes
Laroflex MP 15 is a vinyl chloride-vinyl acetate copolymer supplied in flake form, a primary form under Chapter 39. With a 15% vinyl acetate content, it meets the classification criteria for vinyl chloride-vinyl acetate copolymers of heading 3904.30. It is used in anti-corrosion coatings and other industrial applications.
Pliovic MVP Vinyl Chloride Terpolymer Resin
Pliovic MVP is a vinyl chloride-vinyl acetate terpolymer resin in pellet form, a primary form under Chapter 39. The vinyl chloride and vinyl acetate monomer units together exceed 95% of the total polymer weight, qualifying it as a vinyl chloride-vinyl acetate copolymer. It is used in blow molding applications.