Medical-Grade Propylene Copolymer Resin
Medical-grade propylene copolymer resin, with 98% propylene and minimal ethylene, sterilizable for syringes and IV bags. The resin is in primary form as granules and is not chemically modified, falling under tariff item 3902.30.00 as a propylene copolymer. It offers gamma-stable properties for medical applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the propylene content is 95% or more and the product is a homopolymer
Homopolymers of propylene are classified under 3902.10.00.
If the resin is imported as finished medical articles
Finished medical articles of plastics fall under heading 3926.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document the copolymer composition with propylene exceeding 95% by weight to support classification under 3902.30.00
• Provide the CBSA with a certificate of analysis and technical specifications
• Verify compliance with Canadian medical device regulations if used in medical devices
Related Products under Tariff item 3902.30.00
Automotive-Grade Propylene-Butene Copolymer
Automotive-grade propylene-butene copolymer pellets, where propylene contributes over 95% by weight and butene is the comonomer. These pellets are in primary form and are not chemically modified, making them classifiable under tariff item 3902.30.00 as propylene copolymers. They are designed for use in thermoplastic polyolefin (TPO) compounds for automotive exterior parts, offering enhanced weather resistance.
Blow Molding Propylene Copolymer Pellets
Blow molding propylene copolymer pellets, a propylene-ethylene copolymer with 96% propylene by weight. These pellets are in primary form and are not chemically modified, qualifying as propylene copolymers under tariff item 3902.30.00. They provide balanced stiffness and impact resistance for blow-molded bottles.
Film-Grade Propylene Random Copolymer
Film-grade propylene random copolymer, a random copolymer with 95.5% propylene by weight, used for cast films in food packaging. The resin is in primary form as beads and is not chemically modified, falling under tariff item 3902.30.00 as a propylene copolymer. It offers a low seal initiation temperature for packaging applications.
High-Clarity Propylene Copolymer Resin
High-clarity propylene copolymer resin, with propylene monomers at 97% by weight, engineered for optical clarity in medical packaging. The resin is in primary form and is not chemically modified, classifiable under tariff item 3902.30.00 as a propylene copolymer. It is used in blow molding applications requiring transparency.
Impact-Resistant Propylene Copolymer Pellets
Impact-resistant propylene copolymer pellets, with propylene units exceeding 95% by weight and butene as the comonomer. These pellets are in primary form and are not chemically modified, falling under tariff item 3902.30.00 as propylene copolymers. They are designed for high-impact applications such as automotive bumpers.
Injection Molded Propylene Copolymer Pellets
Injection molded propylene copolymer pellets, a high-flow copolymer with 97% propylene and hexene as the comonomer. These pellets are in primary form and are not chemically modified, classifiable under tariff item 3902.30.00 as propylene copolymers. They offer dimensional stability for precision injection molding of housings.