Discarded Cutting Oil Waste
Discarded cutting oil waste is a soluble oil emulsion used in metal machining operations that has become contaminated and unfit for further use. Despite water dilution during use, the petroleum base exceeds 70% by weight, qualifying it as a waste oil under tariff item 2710.99.00. This product is classified as waste oil because it contains mainly petroleum oils and is no longer fit for its original purpose.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the oil is not waste but a reusable preparation
Heading 2710 covers petroleum oils and preparations; if the cutting oil can be reclaimed and reused, it may fall under this subheading for other lubricating oils.
If the product contains less than 70% petroleum oil
Preparations for lubricating with less than 70% petroleum oil are classified in chapter 34.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the petroleum oil content exceeds 70% by weight and document the waste nature of the product with lab analysis
• Verify whether the waste oil is subject to the Export and Import of Hazardous Waste Regulations, which may require permits from Environment and Climate Change Canada before importation
• Declare the product accurately as waste oil to avoid misclassification penalties
Related Products under Tariff item 2710.99.00
Aviation Kerosene Filter Waste
Aviation kerosene filter waste is contaminated kerosene collected from filtration systems in aviation fuel handling facilities. It is classified under tariff item 2710.99.00 as kerosene waste oil unfit for direct fuel use. The contamination from filtration makes it waste oil.
Contaminated Ethanol Fuel Blend Waste
Contaminated ethanol fuel blend waste (E10 or E85) results from phase separation in storage, where water causes emulsion failure. It is classified under tariff item 2710.99.00 as waste motor fuel because it is no longer usable as fuel. The water-induced emulsion failure makes it a waste oil under Chapter 27.
Contaminated Heavy Fuel Oil from Tank Cleaning (API <25°)
Contaminated heavy fuel oil recovered from tank cleaning operations, with an API gravity below 25 degrees, is classified as waste oil under tariff item 2710.99.00. This product consists mainly of petroleum oils obtained from bituminous minerals and is no longer fit for use as a primary product, meeting the definition of waste oils in Chapter 27.
Contaminated Motor Fuel Blending Stock Waste
Contaminated motor fuel blending stock waste comes from refinery off-spec production where impurities exceed blending viability. It is classified under tariff item 2710.99.00 as waste motor fuel blending stock. The product is no longer suitable for blending due to contamination levels.
Discarded No. 6 Fuel Oil Blend (API <25°)
Discarded No. 6 fuel oil blend with an API gravity below 25 degrees is classified as waste oil under tariff item 2710.99.00. This product is a residual fuel oil obtained from bituminous minerals that is no longer suitable for its original purpose, qualifying as waste oil per Chapter 27.
Drained Diesel Fuel from Heavy Equipment
Drained diesel fuel from heavy equipment is contaminated with microbial growth and particulates, making it unsuitable for engines. It is classified under tariff item 2710.99.00 as waste motor fuel. The degradation confirms its status as waste oil under Chapter 27.