Agglomerated
Iron ores and concentrates, including roasted iron pyrites. > Iron ores and concentrates, other than roasted iron pyrites: > Agglomerated > Agglomerated
Duty Rate (from China)
Products classified under Tariff item 2601.1
Banded Hematite Quartzite Fines
Banded hematite quartzite (BHQ) iron ore fines are non-agglomerated, low-grade ores with a quartz matrix, typically of Indian origin. They are classified under tariff item 2601.11.00 as 'other' non-agglomerated iron ores.
2601.11.00Carajás High-Grade Non-Agglomerated Iron Ore
High-grade Brazilian iron ore fines with iron content exceeding 65%, naturally occurring and not subjected to any agglomeration processes. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore, distinct from agglomerated forms such as pellets or briquettes.
2601.11.00Coarse Banded Iron Formation Ore
Coarse banded iron formation (BIF) ore features alternating iron oxide and silica bands in chunks greater than 4.75mm, non-agglomerated. It is classified under tariff item 2601.11.00 as a non-agglomerated iron ore, with particle size determining its statistical category.
2601.11.00Coarse Goethite Iron Ore
Coarse goethite iron ore is a hydrated iron oxide with large particles exceeding 4.75mm, sourced from sedimentary deposits for blast furnace feed. It is classified under tariff item 2601.11.00 as a non-agglomerated coarse iron ore.
2601.11.00Coarse Hematite Iron Ore
Coarse hematite iron ore consists of non-agglomerated particles primarily exceeding 4.75 mm in diameter, with high iron oxide content used directly in blast furnaces. It falls under tariff item 2601.11.00 as a coarse, non-agglomerated iron ore.
2601.11.00Coarse Itabirite Iron Ore
Coarse itabirite iron ore is a metamorphosed quartz-hematite mix with large particles over 4.75mm, direct shipped to mills. It is classified under tariff item 2601.11.00 as a non-agglomerated coarse iron ore.
2601.11.00Coarse Limonite Iron Ore
Coarse limonite iron ore comprises amorphous hydrated iron oxides in chunks over 4.75mm, used in ironworks after minimal preparation. It is classified under tariff item 2601.11.00 as a non-agglomerated coarse iron ore.
2601.11.00Coarse Magnetite Iron Ore
Coarse magnetite iron ore features magnetic iron oxide lumps with most particles over 4.75mm, ideal for direct reduction processes in steelmaking. It is classified under tariff item 2601.11.00 for its non-agglomerated, coarse nature.
2601.11.00Coarse Non-Agglomerated Iron Ore (Over 4.75mm)
Coarse hematite iron ore with the majority of particles exceeding 4.75mm, screened and non-agglomerated. This product is classified under tariff item 2601.11.00 as non-agglomerated iron ore, with the particle size being a statistical distinction rather than a classification difference.
2601.11.00Coarse Siderite Iron Ore
Coarse siderite iron ore is ferrous carbonate in large grains mostly above 4.75mm, calcined for iron production. It is classified under tariff item 2601.11.00 as a non-agglomerated coarse iron ore.
2601.11.00Coarse Taconite Iron Ore
Coarse taconite iron ore from banded iron formations has particles exceeding 4.75mm, non-agglomerated for initial processing. It is classified under tariff item 2601.11.00 as a coarse non-agglomerated iron ore.
2601.11.00Goethite Iron Ore Concentrate
Goethite iron ore concentrate enriched to 60-65% Fe through wet beneficiation processes, resulting in a fine, non-agglomerated product. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00Goethite Iron Ore Fines
Goethite-rich iron ore fines are non-agglomerated and not roasted pyrites, fitting tariff item 2601.11.00 as 'other' iron ores. Common in sedimentary deposits, they are used in direct reduction processes.
2601.11.00Goethite-Rich Non-Agglomerated Iron Ore
Goethite-rich iron ore fines with approximately 55% iron content, naturally occurring in a non-agglomerated pisolitic form. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore, regardless of its lower grade, as the classification is based on the ore type and processing, not iron content.
2601.11.00Hematite Iron Ore Concentrate
High-purity hematite iron ore concentrate derived from hematite deposits, with iron content around 67% Fe after beneficiation via gravity or magnetic separation, in non-agglomerated powder form. This product is classified under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00Hematite Iron Ore Fines
Hematite iron ore in fine particle form, typically with particles under 6.35 mm, is classified under tariff item 2601.11.00 as non-agglomerated iron ore fines. It is used primarily in blast furnaces for steelmaking.
2601.11.00High-Grade Pilbara Iron Ore Concentrate
Premium Pilbara iron ore concentrate from Australia with 67%+ Fe in non-agglomerated fine form, produced via dense media separation. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00High Phosphorus Non-Agglomerated Iron Ore Fines
Non-agglomerated iron ore fines with elevated phosphorus content of 1-2%, requiring special steelmaking treatments. This product is classified under tariff item 2601.11.00 as a non-agglomerated iron ore, as impurity levels do not affect the tariff classification.
2601.11.00Itabirite Iron Ore Concentrate
Itabirite iron ore concentrate from Brazil's Quadrilátero Ferrífero, a fine non-agglomerated silica-lean product averaging 66% Fe post-flotation. This product is classified under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00Itabirite Iron Ore Concentrate Fines
Brazilian itabirite iron ore concentrate in fines form is non-agglomerated, processed from high-silica banded ore to 65%+ Fe fines. It is classified under tariff item 2601.11.00 as 'other' non-agglomerated iron ores.
2601.11.00Kiruna Magnetite Concentrate
Kiruna-type magnetite concentrate from Sweden's LKAB mines, a high-purity, non-agglomerated powder with 69% Fe, used in premium steel grades. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00Kiruna Magnetite Fines
Kiruna Magnetite Fines are high-purity magnetite iron ore fines from Sweden, non-agglomerated and used as premium pellet feed in steelmaking. They fall under tariff item 2601.11.00 as non-agglomerated iron ores and concentrates, excluding roasted iron pyrites.
2601.11.00Kiruna Magnetite Iron Ore Concentrate Fines
Swedish magnetite iron ore concentrate ground to a fine non-agglomerated powder, with iron content between 67-70%. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate, having been beneficiated but not agglomerated.
2601.11.00Limonite Iron Ore Powder
Limonite Iron Ore Powder is a fine, non-agglomerated iron ore derived from weathered deposits, used as pellet feed in steel mills. It is classified under tariff item 2601.11.00 as a non-agglomerated iron ore, excluding coarse and roasted types.
2601.11.00Limonite Non-Agglomerated Iron Ore
Hydrated limonite iron ore fines with approximately 50% iron content, naturally occurring in a non-agglomerated form. This product is classified under tariff item 2601.11.00 as a non-agglomerated iron ore, as the classification covers all natural non-agglomerated iron-bearing ores.
2601.11.00Magnetite Iron Ore Concentrate
Magnetite iron ore concentrate is a finely ground, non-agglomerated product with high iron content, typically over 65% Fe, produced by processing raw magnetite ore through crushing, grinding, and magnetic separation. It falls under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate, not roasted iron pyrites.
2601.11.00Mesabi Range Taconite Iron Ore Fines
Taconite iron ore fines from the Mesabi Range, with natural iron content of 30% upgraded to 60%+, non-agglomerated after grinding. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore, as it has not been roasted or pelletized.
2601.11.00Non-Agglomerated Hematite Iron Ore Fines
Hematite iron ore fines with iron content typically 60-65%, consisting of particles mostly under 6.3mm, non-agglomerated and directly usable in blast furnaces after screening. This product is classified under tariff item 2601.11.00 as a non-agglomerated iron ore.
2601.11.00Pilbara Blend Non-Agglomerated Iron Ore Fines
Premium Australian Pilbara blend iron ore fines with 62% iron content, non-agglomerated with low silica and alumina impurities, exported in bulk for direct sintering or blast furnace feed. This product falls under tariff item 2601.11.00 as a non-agglomerated iron ore.
2601.11.00Pilbara Hematite Fines
Pilbara Hematite Fines are direct shipping ore fines from Australia, non-agglomerated and used in steel production. They are classified under tariff item 2601.11.00 as non-agglomerated iron ores and concentrates.
2601.11.00Siderite Iron Ore Concentrate
Siderite iron ore concentrate is derived from sedimentary carbonate ores, finely milled and magnetically separated to yield non-agglomerated powder with 62% Fe content. It is classified under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00Siderite Iron Ore Concentrate Fines
Carbonate siderite iron ore fines with 45-50% iron content, magnetically concentrated and non-agglomerated. This product is classified under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate, as it has not been roasted or pelletized.
2601.11.00Siderite Iron Ore Fines
Siderite Iron Ore Fines are non-agglomerated fines of iron carbonate, a lower-grade ore imported raw for further processing. They are classified under tariff item 2601.11.00 as non-agglomerated iron ores, excluding roasted types.
2601.11.00Taconite Iron Ore Concentrate
Taconite iron ore concentrate is produced from low-grade banded iron formations, ground to fine non-agglomerated particles with 65-68% Fe after magnetic separation. It is classified under tariff item 2601.11.00 as a non-agglomerated iron ore concentrate.
2601.11.00Taconite Iron Ore Fines
Taconite Iron Ore Fines are low-grade iron ore fines from Minnesota, typically containing 20-30% iron, destined for pelletizing plants. They are non-agglomerated and classified under tariff item 2601.11.00 as non-agglomerated iron ores.
2601.12.00Australian Pilbara Hematite Sinter Feed Pellets
Australian Pilbara hematite sinter feed pellets are premium agglomerated hematite ores, pelletized for sinter plant feed with a uniform size exceeding 4.75 mm. These pellets are classified under tariff item 2601.12.00 as agglomerated iron ores, consistent with Chapter 26's scope for metallurgical ores.
2601.12.00BF Iron Ore Pellets
Blast furnace grade iron ore pellets, agglomerated for traditional blast furnace steel production, featuring high ferrous content and uniform sizing around 9-16 mm. These pellets fall under 2601.12.00.
2601.12.00Brazilian Itabirite Iron Ore Briquettes
Brazilian itabirite iron ore briquettes are agglomerated from itabirite ore, compacted into briquettes exceeding 4.75 mm for efficient transport and smelting. These briquettes are classified under tariff item 2601.12.00 as agglomerated iron ores, meeting Chapter 26's definition of ores for metallurgical use.
2601.12.00Carajás Hematite DR Pellets
High-grade hematite iron ore from Brazil's Carajás mine, formed into fluxed DR-grade pellets for direct reduction processes. The agglomeration process qualifies it under tariff item 2601.12.00 as agglomerated iron ore.
2601.12.00Carajás High-Grade Iron Ore Briquettes
Carajás high-grade iron ore briquettes are premium agglomerated ores from Brazil's Carajás region, briquetted for dust-free handling and low-impurity steelmaking. These briquettes are classified under tariff item 2601.12.00 as agglomerated iron ores, consistent with Chapter 26's metallurgical ore scope.
2601.12.00Direct Reduced Iron (DRI) Briquettes (HBI)
Hot briquetted iron (HBI) produced from direct reduction of agglomerated iron ore fines, compressed into dense briquettes to prevent reoxidation. This product is classified as agglomerated iron ore under 2601.12.00.
2601.12.00Direct Reduced Iron Ore (DRI) Pellets
Direct reduced iron ore pellets are agglomerated iron ore pellets pre-reduced for direct use in electric arc furnaces, sized over 4.75 mm. These pellets are classified under tariff item 2601.12.00 as agglomerated iron ores prior to full metallization, meeting Chapter 26's scope for ores used in metallurgy.
2601.12.00Fluxed Iron Ore Pellets
Iron ore pellets with added limestone flux for improved blast furnace performance, still primarily iron ore agglomerates. These fluxed pellets fall under 2601.12.00.
2601.12.00Fluxed Iron Ore Sinter (15-30 mm)
Fluxed iron ore sinter, agglomerated with limestone and coke breeze into 15-30 mm lumps for blast furnace charge. The sintering process makes it an agglomerated iron ore under 2601.12.00.
2601.12.00Fluxed Iron Ore Sinter Pellets
Fluxed iron ore sinter pellets are agglomerated with added flux to improve furnace permeability, with particles exceeding 4.75 mm. These pellets are classified under tariff item 2601.12.00 as agglomerated iron ores, enhancing blast furnace efficiency and meeting Chapter 26's metallurgical ore requirements.
2601.12.00Goethite Iron Ore Briquettes
Goethite iron ore briquettes are formed by agglomerating goethite-rich iron ore fines through binding and compression, creating compact shapes for steel mill use. This product is classified under tariff item 2601.12.00 as an agglomerated iron ore, with particles under the coarse threshold, consistent with Chapter 26's metallurgical ore scope.
2601.12.00Goethite Iron Ore Sinter Feed
Goethite iron ore sinter feed is an agglomerated form of limonitic iron ore, nodulized to create a uniform feed for sinter plants in integrated steel mills. This product falls under tariff item 2601.12.00 as an agglomerated iron ore, meeting the requirements of Chapter 26 for ores used in metallurgical processes.
2601.12.00Hematite Iron Ore Pellets
Agglomerated pellets from hematite (Fe2O3) concentrates, optimized for high productivity in pellet-fed blast furnaces. These pellets are classified as agglomerated iron ore under 2601.12.00.
2601.12.00Hematite Pellet Feed Briquettes
Agglomerated hematite fines from Brazilian Carajás ore, formed into briquettes for direct reduction processes. These briquettes are classified as agglomerated iron ore under 2601.12.00.
2601.12.00High-Grade Hematite Briquettes
High-grade hematite briquettes are agglomerated from hematite iron ore fines, pressed into briquettes for blast furnace feed with an iron content exceeding 65%. They are classified under tariff item 2601.12.00 as agglomerated iron ores, meeting the Chapter 26 definition of ores for metallurgical use.
2601.12.00High-Grade Magnetite Pellets
Pellets produced from magnetite iron ore concentrates, agglomerated for premium steelmaking applications with iron content over 70%. These pellets fall under 2601.12.00.
2601.12.00Iron Ore Briquettes (Non-Coarse Agglomerates)
Iron ore briquettes made from fines and concentrates are agglomerated through binding and compression to form compact shapes with a dominant particle size under 4.75 mm. These non-roasted agglomerates are classified under tariff item 2601.12.00 as agglomerated iron ores, consistent with Chapter 26's scope.
2601.12.00Iron Ore Pellets (10-16 mm)
Iron ore pellets produced by binding fine iron ore particles with bentonite and heat-hardening them into spheres of 10-16 mm. These agglomerated pellets fall under tariff item 2601.12.00.
2601.12.00Iron Ore Pellets (DR Grade)
High-quality iron ore pellets designed for direct reduction processes in steelmaking, agglomerated from fine iron ore concentrates with a typical iron content of 67-69%. These pellets fall under 2601.12.00.
2601.12.00Kiruna Magnetite Concentrate Briquettes
High-purity magnetite from Sweden's Kiruna mine, ground to fine particles and agglomerated into hardened pellets for direct reduction feed. This product is classified as agglomerated iron ore under 2601.12.00.
2601.12.00Kiruna Magnetite Pellet Feed
Kiruna magnetite pellet feed is agglomerated magnetite from Sweden's Kiruna mine, processed into large-diameter pellets for global steel production. These pellets are classified under tariff item 2601.12.00 as agglomerated iron ores, consistent with Chapter 26's scope for metallurgical ores.
2601.12.00Kiruna-Type Magnetite Pellets
Kiruna-type magnetite pellets are high-purity agglomerated iron ore pellets produced from magnetite processing, designed for use in electric arc furnaces. They are classified under tariff item 2601.12.00 as agglomerated iron ores, consistent with Chapter 26's scope for metallurgical ores.
2601.12.00Lumpy Hematite Briquetted Concentrate
Lumpy hematite briquetted concentrate is high-purity hematite concentrate agglomerated into lumpy briquettes exceeding 4.75 mm for premium steel grades. This product is classified under tariff item 2601.12.00 as agglomerated iron ore, reducing transport volume while maintaining ore quality, consistent with Chapter 26's metallurgical scope.
2601.12.00Magnetite Iron Ore Briquettes
Briquetted magnetite concentrate from taconite processing, where fine magnetic iron ore is pelletized or briquetted for transport and furnace use. These agglomerated forms fall under 2601.12.00.
2601.12.00Mesabi Range Taconite Pellets
Mesabi Range taconite pellets are agglomerated taconite iron ore from Minnesota's Mesabi Range, formed into hard pellets exceeding 4.75 mm. These pellets are classified under tariff item 2601.12.00 as agglomerated iron ores, consistent with Chapter 26's scope for metallurgical ores.