Acid Grade Fluorspar Lump
Acid grade fluorspar in lump form, containing approximately 97% calcium fluoride by weight. This natural mineral is used primarily in the production of hydrofluoric acid for industrial chemical processes, and its calcium fluoride content does not exceed 97%, placing it under this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | — | Free |
| 🇲🇽Mexico | Free | — | Free |
| 🇺🇸United States | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the calcium fluoride content exceeds 97% by weight.
Higher purity fluorspar is classified under a different tariff item within the same subheading.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure the calcium fluoride content is documented and does not exceed 97% by weight, as higher purity may shift classification
• Provide a certificate of analysis to the CBSA to support the declared value and tariff classification
• Verify whether the product is in its natural state (crushed or lump) and not processed beyond mechanical processes, as per Chapter 25 notes
Related Products under Tariff item 2529.21.00
Ceramic Fluorspar Powder
Ground fluorspar powder with a calcium fluoride content of 96% by weight, used in ceramic glazes and enamels to improve fluidity. The product is natural fluorspar that has been ground, and its CaF2 content is at or below 97%, making it classifiable under this tariff item.
Fluorspar Briquettes Low Grade
Compressed low-grade fluorspar briquettes containing 94% calcium fluoride, formed for easier handling in aluminum smelting. The briquettes are agglomerated fluorspar not further worked, and the CaF2 content is below 97%, so they are classified under this tariff item.
Fluorspar Gravel 95% CaF2
Natural fluorspar gravel screened to 3-10mm with 95% calcium fluoride content, used as a flux in phosphate fertilizer production. The product is in granular crude form, and its CaF2 content is below 97%, making it classifiable under this tariff item.
Metallurgical Grade Fluorspar Fines
Crushed fluorspar fines with a calcium fluoride content of 95-97%, used as a fluxing agent in steelmaking to lower melting points. The product is low-grade fluorspar in powder or chunk form, and its CaF2 content does not exceed 97%, placing it under this tariff item.
Raw Fluorspar Chips for HF Production
Chipped fluorspar with a calcium fluoride content of 92-96%, sized 10-50mm for feeding into hydrofluoric acid reactors. This raw material is natural fluorspar in chip form, and its CaF2 concentration is below 97%, making it classifiable under this tariff item.