New

Ask Wove anything about tariffs.

Try Tariff Assistant

Limestone Monument Facade Slab

Limestone monument facade slabs are rectangular limestone slabs exceeding 7.5 cm thickness, sawn for monumental facades or historical restorations. They are not roughly trimmed beyond rectangular blocks, with no further processing, which meets the requirements of heading 25.16. The product is a type of monumental or building stone that falls under the 'other' category.

Import Duty Rates by Country of Origin

Origin CountryMFN TariffSurtaxesTotal Effective Rate
πŸ‡¨πŸ‡³ChinaFreeβ€”Free
πŸ‡²πŸ‡½MexicoFreeβ€”Free
πŸ‡ΊπŸ‡ΈUnited StatesFreeβ€”Free
πŸ‡©πŸ‡ͺGermanyFreeβ€”Free
πŸ‡―πŸ‡΅JapanFreeβ€”Free

More Specific Codes

This product may fall under a more specific subheading:

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

2515.20.00Same rate: Free

If the limestone is classifiable as alabaster or other calcareous stone under heading 25.15.

Heading 25.15 covers certain calcareous monumental or building stones.

6802.99.00Higher: 6.5% vs Free

If the slabs are further worked, such as polished or carved, for facades.

Worked stone falls under Chapter 68.

Not sure which classification is right?

The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item β€” and can price the duty on it in the same conversation.

Import Tips & Compliance

β€’ Ensure the limestone slabs are not polished, engraved, or otherwise worked, as this would reclassify them under Chapter 68

β€’ Provide CBSA with documentation of the sawing process and the intended use to support classification

β€’ If the limestone is of a type classifiable under heading 25.15, such as alabaster, it may fall under that heading instead

Related Products under Tariff item 2516.90.00

Basalt Exterior Wall Slab

Basalt exterior wall slabs are heavy slabs over 7.5 cm thick, cut rectangular for cladding exterior walls of commercial buildings. They are roughly trimmed or sawn, with no further processing, which aligns with heading 25.16. Basalt is specifically mentioned in the heading, and the product falls under the 'other' category as it is not granite or porphyry.

Bluestone Slabs

Bluestone slabs are a type of sandstone that has been merely cut by sawing into rectangular shapes for use in patios and building steps. They are not processed beyond cutting, which aligns with the scope of heading 25.16 for monumental or building stone. The product is in a crude state and has not been subjected to any further treatment such as polishing or chemical alteration.

Gneiss Cladding Slab

Gneiss cladding slabs are metamorphic stone slabs thicker than 7.5 cm, rectangular sawn for exterior cladding in public monuments. They are not processed beyond cutting, which meets the crude state requirement of Chapter 25. Gneiss is a type of monumental or building stone that falls under the 'other' category of heading 25.16.

Heavy Sandstone Building Slab

Heavy sandstone building slabs are rectangular slabs over 7.5 cm thick, roughly sawn for use in constructing exterior walls or facades in monumental architecture. They are merely cut by sawing, with no further processing, which aligns with heading 25.16. Sandstone is explicitly mentioned in the heading, and the product falls under the 'other' category as it is not granite or porphyry.

Indiana Limestone Building Blocks

Indiana limestone building blocks are roughly trimmed and cut into rectangular shapes by sawing, intended for constructing building facades and walls. They are not subjected to any processing beyond cutting, keeping them within the crude state required by Chapter 25. The blocks are a form of monumental or building stone, specifically limestone, which is not otherwise excluded by the chapter notes.

Limestone Monumental Slabs

Bedford limestone slabs are cut into rectangular shapes for use in gravestones and memorials, representing monumental stone. They are merely cut by sawing and not further processed, which meets the requirements of heading 25.16. The product is in a crude state, with no polishing or other finishing applied.